| F1-03 |
Standard
Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron
Tubes |
电子管用镀镍和敷镍钢带 |
| F3-02a |
Standard
Specification for Nickel Strip for Electron Tubes |
电子管镍带 |
| F4-66(2005) |
Standard
Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and
Nickel-Clad Steel Strip for Electron Tubes |
电子管用碳化镍条及碳化镀镍和包镍钢条 |
| F7-95(2006) |
Standard
Specification for Aluminum Oxide Powder |
氧化铝粉末 |
| F14-80(2005) |
Standard
Practice for Making and Testing Reference Glass-Metal Bead-Seal |
标准玻璃金属压条密封胶的生产和试验 |
| F15-04 |
Standard
Specification for Iron-Nickel-Cobalt Sealing Alloy |
铁-镍-钴密封合金 |
| F16-67(2006) |
Standard
Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for
Electronic Devices and Lamps |
电子器件和电灯用电线及带条的直径或厚度测量方法 |
| F17-02 |
Standard
Terminology Relating to Flexible Barrier Materials |
与柔性阻挡层材料相关的术语定义 |
| F18-64(2006) |
Standard
Specification and Test Method for Evaluation of Glass-to-Metal Headers Used
in Electron Devices |
电子设备用玻璃金属底板评定规范和试验方法 |
| F19-64(2005)e1 |
Standard
Test Method for Tension and Vacuum Testing Metallized Ceramic Seals |
镀金属陶瓷密封件抗拉及真空试验方法 |
| F21-65(2002) |
Standard
Test Method for Hydrophobic Surface Films by the Atomizer Test |
用雾化试验器作疏水表面薄膜的试验方法 |
| F22-02 |
Standard
Test Method for Hydrophobic Surface Films by the Water-Break Test |
用水膜破裂试验作疏水表面薄膜的试验方法 |
| F24-04 |
Standard
Method for Measuring and Counting Particulate Contamination on Surfaces |
表面颗粒状污染物的计数和测量方法 |
| F25-04 |
Standard
Test Method for Sizing and Counting Airborne Particulate Contamination in
Cleanrooms and Other Dust-Controlled Areas |
电子及类似用途用的清洁室及其它防尘区域空气中粒状杂质的测量和计算方法 |
| F29-97(2002) |
Standard
Specification for Dumet Wire for Glass-to-Metal Seal Applications |
玻璃与金属密封装置用杜美丝 |
| F30-96(2002) |
Standard
Specification for Iron-Nickel Sealing Alloys |
铁镍密封合金 |
| F31-05 |
Standard
Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy |
42%镍,6%铬铁密封合金 |
| F34-02 |
Standard
Practice for Construction of Test Cell for Liquid Extraction of Flexible
Barrier Materials |
挠性阻挡层材料液体提取实验台的结构 |
| F36-99(2003) |
Standard
Test Method for Compressibility and Recovery of Gasket Materials |
垫片材料的压缩性及回弹性的试验方法 |
| F37-00 |
Standard
Test Methods for Sealability of Gasket Materials |
垫片材料的密封性的试验方法 |
| F38-00 |
Standard
Test Methods for Creep Relaxation of a Gasket Material |
垫片材料的蠕变松驰作用的试验方法 |
| F44-95(2006) |
Standard
Specification for Metallized Surfaces on Ceramic |
陶瓷的金属化表面 |
| F50-92(2001)e1 |
Standard
Practice for Continuous Sizing and Counting of Airborne Particles in
Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting
Single Sub-Micrometre and Larger Particles |
使用能检测单个亚测微计及较大粒子的仪器在控制尘埃区域及无菌区中连续测定空气中悬浮粒子的大小及计数 |
| F51-00(2002)e1 |
Standard
Test Method for Sizing and Counting Particulate Contaminant In and On Clean
Room Garments |
在无菌室内衣服上颗粒污物的粒度测量与计数方法 |
| F67-06 |
Standard
Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS
R50250, UNS R50400, UNS R50550, UNS R50700) |
外科植入用非合金钛 |
| F68-05 |
Standard
Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
电子装置用可锻无氧铜 |
| F72-06 |
Standard
Specification for Gold Wire for Semiconductor Lead Bonding |
半导体引线连接用金丝线 |
| F73-96(2002) |
Standard
Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps |
电子器件及灯泡用钨铼合金丝 |
| F75-01 |
Standard
Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting
Alloy for Surgical Implants (UNS R30075) |
外科植入设备用铸造钴铬钼合金(UNS
R30075) |
| F76-86(2002) |
Standard
Test Methods for Measuring Resistivity and Hall Coefficient and Determining
Hall Mobility in Single-Crystal Semiconductors |
测量单晶半导体的电阻率、霍尔系数及霍尔迁移率的试验方法 |
| F78-97(2002) |
Standard
Test Method for Calibration of Helium Leak Detectors by Use of Secondary
Standards |
使用二次标准件校正氦检漏仪的试验方法 |
| F79-69(2005) |
Standard
Specification for Type 101 Sealing Glass |
101型密封玻璃规范 |
| F83-71(2002) |
Standard
Practice for Definition and Determination of Thermionic Constants of Electron
Emitters |
电子发射器的热离子常数的规定和测定 |
| F85-76(2002) |
Standard
Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes |
电子管用导体引线的命名 |
| F86-04 |
Standard
Practice for Surface Preparation and Marking of Metallic Surgical Implants |
金属外科植入物表面制备和标志 |
| F88-06 |
Standard
Test Method for Seal Strength of Flexible Barrier Materials |
挠性隔栅材料的密封强度的测试方法 |
| F90-01 |
Standard
Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for
Surgical Implant Applications (UNS R30605) |
外科植入设备用锻制钴铬钨镍合金(UNS
R30605) |
| F91-70(2001)e1 |
Standard
Practice for Testing for Leaks in the Filters Associated With Laminar Flow
Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector |
用冷凝核探测器对层流无菌室及无菌工作站配备的过滤器进行检漏试验 |
| F92-93(2003) |
Standard
Practice for Determination of Character Yield of Inked Fabric Typewriter and
Printer Ribbons |
打字色带耐磨性的测定 |
| F96-77(2005) |
Standard
Specification for Electronic Grade Alloys of Copper and Nickel in Wrought
Forms |
锻制的铜和镍电子级合金 |
| F97-72(2002)e1 |
Standard
Practices for Determining Hermeticity of Electron Devices by Dye Penetration |
用染料渗透法测定电子器件的密封性 |
| F99-76(2001) |
Standard
Practice for Preparation of Flexible Barrier Material Specifications |
挠性阻挡层材料规范的制定 |
| F104-03 |
Standard
Classification System for Nonmetallic Gasket Materials |
非金属衬垫材料分类系统 |
| F105-72(2005) |
Standard
Specification for Type 58 Borosilicate Sealing Glass |
58型硼硅酸盐密封玻璃 |
| F106-06 |
Standard
Specification for Brazing Filler Metals for Electron Devices |
电子器件用铜焊填充金属 |
| F109-04 |
Standard
Terminology Relating to Surface Imperfections on Ceramics |
与陶瓷表面缺陷相关的术语 |
| F111-96(2002) |
Standard
Practice for Determining Barium Yield, Getter Gas Content, and Getter
Sorption Capacity for Barium Flash Getters |
钡闪光消气剂的钡收获率、消气剂吸气量和消气剂吸着(能)力的测定 |
| F112-00e1 |
Standard
Test Method for Sealability of Enveloped Gaskets |
包封衬垫密封性的试验方法 |
| F116-00(2004) |
Standard
Specification for Medical Screwdriver Bits |
医疗用螺丝刀 |
| F118-04 |
Standard
Definitions of Terms Relating to Gaskets |
与衬垫相关的术语定义 |
| F119-82(2002) |
Standard
Test Method for Rate of Grease Penetration of Flexible Barrier Materials
(Rapid Method) |
挠性阻挡层材料润滑脂渗透率的试验方法 |
| F129-97(2002) |
Standard
Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other
Than Fabric Type |
复写纸和色带及其它织物上油墨沉积总值的试验方法 |
| F136-02a |
Standard
Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low
Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
外科植入设备用锻制钛6铝4钒特低杂质合金(UNS
R56401) |
| F137-03 |
Standard
Test Method for Flexibility of Resilient Flooring Materials with Cylindrical
Mandrel Apparatus |
用圆柱形芯轴装置对弹性地板材料韧性的试验方法 |
| F138-03 |
Standard
Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless
Steel Bar and Wire for Surgical Implants (UNS S31673) |
外科移植用不锈钢棒及丝(特级)(UNS
S31673) |
| F139-03 |
Standard
Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless
Steel Sheet and Strip for Surgical Implants (UNS S31673) |
外科移植用不锈钢薄板及带(特级)(UNS
S31673) |
| F140-98(2003) |
Standard
Practice for Making Reference Glass-Metal Butt Seals and Testing for
Expansion Characteristics by Polarimetric Methods |
偏振法测定膨胀特性用的参考玻璃与金属对接密封材料的制作与试验 |
| F141-04 |
Standard
Terminology Relating to Resilient Floor Coverings |
弹性地板覆盖物术语 |
| F142-93(2000)e1 |
Standard
Test Method for Indentation of Resilient Floor Tiles (McBurney Test) |
弹性地板覆盖物刻压测试方法(麦克伯尼试验) |
| F144-80(2005) |
Standard
Practice for Making Reference Glass-Metal Sandwich Seal and Testing for
Expansion Characteristics by Polarimetric Methods |
偏振法测定膨胀特性用的参考玻璃金属夹层密封材料的制作与试验 |
| F145-72(2003) |
Standard
Practice for Evaluating Flat-Faced Gasketed Joint Assemblies |
平面衬垫连接件的评定 |
| F146-04 |
Standard
Test Methods for Fluid Resistance of Gasket Materials |
垫片材料抗流体性能的测试方法 |
| F147-87(2003) |
Standard
Test Method for Flexibility of Non-Metallic Gasket Materials |
非金属衬垫材料挠性试验方法 |
| F148-02 |
Standard
Test Method for Binder Durability of Cork Composition Gasket Materials |
软木合成垫料粘合耐久性的测试方法 |
| F149-92b(2003) |
Standard
Terminology Relating to Optical Character Recognition |
与光学字符识别相关的术语 |
| F150-98 |
Standard
Test Method for Electrical Resistance of Conductive and Static Dissipative
Resilient Flooring |
导电弹性地板材料电阻试验方法 |
| F152-95(2002) |
Standard
Test Methods for Tension Testing of Nonmetallic Gasket Materials |
非金属垫料抗拉试验的测试方法 |
| F153-95(2002) |
Standard
Test Method for Determining the Yield of Wide Inked Computer Ribbons |
计算机宽油墨色带耐磨性的试验方法 |
| F180-94(2005) |
Standard
Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices |
电子装置用细金属线和带状金属线密度的测试方法 |
| F204-76(2002) |
Standard
Test Method for Surface Flaws in Tungsten Seal Rod and Wire |
密封钨丝和钨条表面裂纹的试验方法 |
| F205-94(2005) |
Standard
Test Method for Measuring Diameter of Fine Wire by Weighing |
用称量法测定细金属丝直径的测试方法 |
| F218-05 |
Standard
Test Method for Analyzing Stress in Glass |
玻璃应力分析的试验方法 |
| F219-96(2002) |
Standard
Test Methods of Testing Fine Round and Flat Wire for Electron Devices and
Lamps |
电子器件和电灯用细圆丝和扁线的试验方法 |
| F221-98(2003) |
Standard
Terminology Relating to Carbon Paper and Inked Ribbon Products and Images
Made Therefrom |
与复写纸,色带制品以及所产生的图案相关的术语定义 |
| F256-05e1 |
Standard
Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium |
含有18%或26%铬的铬铁密封合金 |
| F269-60(2002) |
Standard
Test Method for Sag of Tungsten Wire |
钨丝弯曲度的试验方法 |
| F288-96(2002) |
Standard
Specification for Tungsten Wire for Electron Devices and Lamps |
电子器件和电灯用钨丝 |
| F289-96(2002) |
Standard
Specification for Molybdenum Wire and Rod for Electronic Applications |
电子设备用钼丝及钼条 |
| F290-94(2005) |
Standard
Specification for Round Wire for Winding Electron Tube Grid Laterals |
绕制电子管栅极支线用圆线 |
| F302-04 |
Standard
Practice for Field Sampling of Aerospace Fluids in Containers |
容器中航空航天流体的现场取样 |
| F303-02 |
Standard
Practices for Sampling for Particles in Aerospace Fluids and Components |
元部件中航空航天流体的取样 |
| F307-02 |
Standard
Practice for Sampling Pressurized Gas for Gas Analysis |
气体分析用压力气体的取样 |
| F309-04 |
Standard
Practice for Liquid Sampling of Noncryogenic Aerospace Propellants |
非冷冻航空航天推进剂的液体取样 |
| F310-04 |
Standard
Practice for Sampling Cryogenic Aerospace Fluids |
冷冻的航空航天流体的取样 |
| F311-97(2002) |
Standard
Practice for Processing Aerospace Liquid Samples for Particulate
Contamination Analysis Using Membrane Filters |
用膜滤器进行粒状污染物分析用航空航天流体样品的处理 |
| F312-97(2003) |
Standard
Test Methods for Microscopical Sizing and Counting Particles from Aerospace
Fluids on Membrane Filters |
膜滤器上航空流体中颗粒微观大小的测定及计数 |
| F316-03 |
Standard
Test Methods for Pore Size Characteristics of Membrane Filters by Bubble
Point and Mean Flow Pore Test |
通过起泡点和平均流动孔试验描述膜过滤器的孔大小特征的试验方法 |
| F318-06 |
Standard
Practice for Sampling Airborne Particulate Contamination in Cleanrooms for
Handling Aerospace Fluids |
处理航空航天流体用无菌室中空气粒子污染物取样 |
| F319-91a(2003) |
Standard
Practice for Polarized Light Detection of Flaws in Aerospace Transparency
Heating Elements |
航空航天用透明加热元件中裂纹的偏振光检测 |
| F320-05 |
Standard
Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures |
航空和航天透明外壳抗冰雹撞击性的测试方法 |
| F326-96(2001)e2 |
Standard
Test Method for Electronic Measurement for Hydrogen Embrittlement from
Cadmium-Electroplating Processes |
镀镉工艺用电子氢脆试验方法 |
| F327-78(2000) |
Standard
Practice for Sampling Gas Blow Down Systems and Components for Particulate
Contamination by Automatic Particle Monitor Method |
用自动粒子监控器对气体排污系统和部件的粒子污染物取样的规程 |
| F328-98(2003) |
Standard
Practice for Calibration of an Airborne Particle Counter Using Monodisperse
Spherical Particles |
用接近单分散球形粒子材料测定空气中粒子计数器的计数和尺寸的准确性 |
| F330-89(2004) |
Standard
Test Method for Bird Impact Testing of Aerospace Transparent Enclosures |
航空航天透明外壳撞鸟试验的试验方法 |
| F331-05 |
Standard
Test Method for Nonvolatile Residue of Solvent Extract from Aerospace
Components (Using Flash Evaporator) |
从航空航天部件中提取的卤化溶剂的不挥发残渣的试验方法(使用旋转瞬间蒸发器) |
| F335-03 |
Standard
Terminology Relating to Electrostatic Copying |
与静电复印相关的术语 |
| F336-02 |
Standard
Practice for Design and Construction of Nonmetallic Enveloped Gaskets for
Corrosive Service |
腐蚀作业用非金属包封衬垫的设计和结构 |
| F355-01 |
Standard
Test Method for Shock-Absorbing Properties of Playing Surface Systems and
Materials |
游动表面系统和材料吸收冲击性能的测试方法 |
| F357-78(2002) |
Standard
Practice for Determining Solderability of Thick Film Conductors |
厚膜导体的软钎焊性测定 |
| F358-83(2002) |
Standard
Test Method for Wavelength of Peak Photoluminescence and the Corresponding
Composition of Gallium Arsenide Phosphide Wafers |
磷化砷化镓片的最大光致发光波长及其相应成分的试验方法 |
| F360-82(2006) |
Standard
Practice for Image Evaluation of Electrostatic Business Copies |
静电办公复制品图象评定 |
| F362-91(2005) |
Standard
Test Method for Determining the Erasability of Inked Ribbons |
测定油墨色带消磁性试验方法 |
| F363-99(2004) |
Standard
Test Method for Corrosion Testing of Gaskets |
衬垫的腐蚀试验方法 |
| F364-96(2002) |
Standard
Specification for Molybdenum Flattened Wire for Electron Tubes |
电子管用扁平钼丝 |
| F366-04 |
Standard
Specification for Fixation Pins and Wires |
固定销钉及金属丝 |
| F372-99(2003) |
Standard
Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials
Using an Infrared Detection Technique |
用红外线检查技术检查挠性隔栅材料水蒸气散发率的测试方法 |
| F373-01 |
Standard
Test Method for Embossed Depth of Resilient Floor Coverings |
弹性地板覆盖物压纹深度的试验方法 |
| F375-89(2005) |
Standard
Specification for Integrated Circuit Lead Frame Material |
集成电路引线框材料 |
| F377-03 |
Standard
Practice for Calibration of Braking/Tractive Measuring Devices for Testing
Tires |
校准充气轮胎试验用刹车力的测试方法 |
| F381-05 |
Standard
Safety Specification for Components, Assembly, Use, and Labeling of Consumer
Trampolines |
蹦床的元件,安装和使用.用户安全 |
| F382-99(2003)e1 |
Standard
Specification and Test Method for Metallic Bone Plates |
金属骨板的静态弯曲特性的测试方法 |
| F384-06 |
Standard
Specifications and Test Methods for Metallic Angled Orthopedic Fracture
Fixation Devices |
钉板的静态弯曲试验 |
| F386-02 |
Standard
Test Method for Thickness of Resilient Flooring Materials Having Flat
Surfaces |
表面平坦的弹性地板铺面材料厚度的测试方法 |
| F387-02 |
Standard
Test Method for Measuring Thickness of Resilient Floor Covering With Foam
Layer |
带有泡沫层的弹性地板覆盖物厚度测量的方法 |
| F390-98(2003) |
Standard
Test Method for Sheet Resistance of Thin Metallic Films With a Collinear
Four-Probe Array |
用共线四探针法对金属薄膜的薄膜电阻的试验方法 |
| F392-93(2004) |
Standard
Test Method for Flex Durability of Flexible Barrier Materials |
挠性阻挡层材料耐挠曲度的试验方法 |
| F395-03 |
Standard
Terminology Relating to Vacuum Cleaners |
与真空吸尘器相关的术语 |
| F396-00(2004) |
Standard
Practice for Comparing One-Time Noncorrectable Typewriter Ribbons |
一次性不能校准的打字机色带比较 |
| F400-04 |
Standard
Consumer Safety Specification for Lighters |
打火机的安全使用规范 |
| F402-05 |
Standard
Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for
Joining Thermoplastic Pipe and Fittings |
热塑性塑料管及配件接合用溶剂粘结剂、油漆腻子及清洁剂的安全操作规范 |
| F403-98 |
Standard
Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using
Highway Vehicles |
测定公路车辆直线前进中刹车时轮胎湿磨擦力的试验方法 |
| F404-04e1 |
Standard
Consumer Safety Specification for High Chairs |
高脚椅的安全使用规范 |
| F405-05 |
Standard
Specification for Corrugated Polyethylene (PE) Pipe and Fittings |
聚乙烯(PE)波纹软管及管配件 |
| F406-06 |
Standard
Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards |
娱乐场地的安全使用规范 |
| F408-99 |
Standard
Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a
Towed Trailer |
用拖挂车朝正前方制动时潮湿牵引用轮胎的测试方法 |
| F409-02 |
Standard
Specification for Thermoplastic Accessible and Replaceable Plastic Tube and
Tubular Fittings |
可卸可更换的热塑性塑料管和管配件 |
| F410-02 |
Standard
Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical
Measurement |
光学测量法对弹性地板覆盖物磨损层厚度的试验方法 |
| F412-06 |
Standard
Terminology Relating to Plastic Piping Systems |
与塑料管系统相关的术语 |
| F414-06 |
Standard
Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving
Plunger |
当轮胎因缓慢移动的插棒而变形时轮胎吸收能量的试验方法 |
| F415-87(2005) |
Standard
Test Method for Curl in Carbon Paper |
复写纸卷曲度的试验方法 |
| F418-77(2002) |
Standard
Practice for Preparation of Samples of the Constant Composition Region of
Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements |
测量霍尔效应用恒定成分范围的外延磷化砷化镓试样的制备 |
| F420-04 |
Standard
Test Method for Access Depth Under Furniture of Vacuum Cleaners |
真空吸尘器可伸入家具底部深度的测试方法 |
| F421-00 |
Standard
Test Method for Measuring Groove and Void Depth in Passenger Car Tires |
轿车轮胎中的凹槽及孔隙深度的试验方法 |
| F428-03a |
Standard
Test Method for Intensity of Scratches on Aerospace Glass Enclosures |
公路车辆在向前直线行驶中轮胎湿传动磨擦力的试验方法 |
| F429-01 |
Standard
Test Method for Shock-Attenuation Characteristics of Protective Headgear for
Football |
航空和航天用玻璃外壳抗划痕强度的试验方法 |
| F430-05 |
Standard
Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
橄榄球运动用防护头盔的减冲击性能的试验方法 |
| F431-04 |
Standard
Specification for Air Performance Measurement Plenum Chamber for Vacuum
Cleaners |
真空吸尘器过滤包用纸的试验方法 |
| F432-04 |
Standard
Specification for Roof and Rock Bolts and Accessories |
真空吸尘器空气性能测定用强制通风室 |
| F433-02 |
Standard
Practice for Evaluating Thermal Conductivity of Gasket Materials |
螺栓、岩石锚栓和附件 |
| F434-93(2003)e1 |
Standard
Test Method for Blow-Out Testing of Preformed Gaskets |
衬垫材料的导热性评定 |
| F436M-04 |
Standard
Specification for Hardened Steel Washers [Metric] |
预制衬垫的漏气试验 |
| F436-04 |
Standard
Specification for Hardened Steel Washers |
淬火的钢垫圈 |
| F437-06 |
Standard
Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 80 |
有螺纹的氯化聚氯乙烯塑料管配件(80号表) |
| F438-04 |
Standard
Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 40 |
套节型氯化聚氯乙烯(CPVC)塑料管配件(40号表) |
| F439-06 |
Standard
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe
Fittings, Schedule 80 |
套节型氯化聚氯乙烯(CPVC)塑料管配件(80号表) |
| F441/F441M-02 |
Standard
Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe,
Schedules 40 and 80 |
氯化聚氯乙烯(CPVC)塑料管配件(40和80号表) |
| F442/F442M-99(2005) |
Standard
Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
(SDR-PR) |
氯化聚氯乙烯(CPVC)塑料管(SDRPR) |
| F444-88(2004)e1 |
Standard
Consumer Safety Specification for Scald-Preventing Devices and Systems in
Bathing Areas |
浴池区域内防烫伤装置及系统的安全使用规范 |
| F445-88(2004)e1 |
Consumer
Safety Specification for Thermal-Shock-Preventing Devices and Systems in
Showering Areas |
淋浴区域内防急冷急热装置和系统的安全使用规范 |
| F446-85(2004)e1 |
Standard
Consumer Safety Specification for Grab Bars and Accessories Installed in the
Bathing Area |
浴池区域内手动杆和辅助装置的安全使用规范 |
| F448-99(2005) |
Test
Method for Measuring Steady-State Primary Photocurrent |
测量稳态初级光电流的试验方法 |
| F449-02e1 |
Standard
Practice for Subsurface Installation of Corrugated Polyethylene Pipe for
Agricultural Drainage or Water Table Control |
农业排水或地下水位控制用热塑塑料波纹管地下安装 |
| F450-01(2005) |
Standard
Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic Wire
Reinforced) |
真空吸尘器软管的耐热性及可靠性的试验方法(塑料纤维增强) |
| F451-99ae1 |
Standard
Specification for Acrylic Bone Cement |
丙烯酸骨胶结剂 |
| F452-76(2002) |
Standard
Specification for Preformed Cranioplasty Plates |
预制头骨形成板 |
| F457-04 |
Standard
Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With
Either Analog or Digital Instrumentation |
装有模拟或数字仪器的测速轮上速率及距离校准的方法 |
| F458-06 |
Standard
Practice for Nondestructive Pull Testing of Wire Bonds |
金属丝连接的非破坏性拉力试验 |
| F459-06 |
Standard
Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds |
微电子器件金属丝连接抗拉强度的测量方法 |
| F462-79(1999) |
Consumer
Safety Specification for Slip-Resistant Bathing Facilities |
浴池的防滑设备安全使用规范 |
| F467-06a |
Standard
Specification for Nonferrous Nuts for General Use |
一般用途有色金属螺母 |
| F467M-06a |
Standard
Specification for Nonferrous Nuts for General Use [Metric] |
一般用途有色金属螺母(米制的) |
| F468M-06 |
Standard
Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
[Metric] |
一般用途有色金属螺栓、六角头螺钉及螺柱 |
| F468-06 |
Standard
Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use |
一般用途有色金属螺栓、六角头螺钉及螺柱(米制的) |
| F470-89(2003) |
Standard
Practice for Caking Temperature of Dry Electrostatic Toner |
干静电调色剂的结块温度 |
| F471-76(2002) |
Standard
Terminology Relating to Combination Locks |
与组合锁相关的术语 |
| F472-92(1998) |
Standard
Terminology for Geometry of Alpine Skis |
高山滑雪板的几何术语 |
| F473-96(2003) |
Standard
Specification for Binding Mounting Area Dimensions on Alpine Skis and
Bindings |
高山滑雪板的捆绑安装部位的尺寸 |
| F476-84(2002) |
Standard
Test Methods for Security of Swinging Door Assemblies |
转动门组合体的安全性试验方法 |
| F477-02e1 |
Standard
Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
连接塑料管用弹性密封件(衬垫) |
| F478-92(1999) |
Standard
Specification for In-Service Care of Insulating Line Hose and Covers |
绝缘线路软管及覆盖物的使用保养 |
| F479-95(2001) |
Standard
Specification for In-Service Care of Insulating Blankets |
绝缘涂层的使用中维护 |
| F480-06b |
Standard
Specification for Thermoplastic Well Casing Pipe and Couplings Made in
Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
按尺寸比例制造的热塑塑料套管管道及连接器(SDR).SCH40和SCH80 |
| F481-97(2002) |
Standard
Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic
Tank Leach Fields |
化肥池沥滤场用热塑塑料管和波纹软管的安装 |
| F482-03 |
Standard
Test Method for Corrosion of Aircraft Metals by Total Immersion in
Maintenance Chemicals |
用保养法对飞行器化学药品的完全浸没金属腐蚀试验的方法 |
| F483-98(2002)e1 |
Standard
Test Method for Total Immersion Corrosion Test for Aircraft Maintenance
Chemicals |
飞行器保养用化学药品的完全浸没腐蚀试验方法 |
| F484-02 |
Standard
Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or
Semi-Liquid Compounds |
丙烯塑料在与液态或半液态化合物接触中产生的应力裂纹的试验方法 |
| F485-02 |
Standard
Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces |
去污剂对未涂漆飞机表面影响的试验方法 |
| F486-01(2006) |
Standard
Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
真空吸尘器的使用和保养手册的编制 |
| F487-88(2006) |
Standard
Specification for Fine Aluminum-1% Silicon Wire for Semiconductor
Lead-Bonding |
纯铝-半导体引线连接用1%硅细丝 |
| F493-04 |
Standard
Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC)
Plastic Pipe and Fittings |
氯化的聚氯乙烯(CPVC)塑料管及配件用可溶解粘结剂 |
| F494-05 |
Standard
Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum
Cleaners |
评定真空吸尘器中初级滤清器完善性的测试方法 |
| F495-99a(2004) |
Standard
Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated
Temperatures |
暴露在高温下的衬垫材料重量损失试验方法 |
| F496-06 |
Standard
Specification for In-Service Care of Insulating Gloves and Sleeves |
绝缘手套和套袖的使用保养 |
| F497-00(2004) |
Standard
Practice for Use of the Electric and Electronic Typewriter as a Test
Instrument |
作为试验工具用的电动打字机的使用 |
| F498-77(1998) |
Standard
Test Method for Center Spring Constant and Spring Constant Balance of Alpine
Skis |
高山滑雪板的中心弹性常数及弹性常数平衡的试验方法 |
| F502-02 |
Standard
Test Method for Effects of Cleaning and Chemical Maintenance Materials on
Painted Aircraft Surfaces |
清洗材料及化学保养材料对涂漆飞行器表面影响的试验方法 |
| F504-05 |
Standard
Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski
Bindings |
成人高山滑雪板绑带的解开力矩的测量方法 |
| F505-87(2006) |
Standard
Practice for Comparative Evaluation of Imaging Properties of Liquid
Electrostatic Toners |
液体静电调色剂成像特性的比较评定 |
| F508-77(2002) |
Standard
Practice for Specifying Thick-Film Pastes |
厚膜膏规格说明 |
| F509-86(2004) |
Standard
Practice for Testing One-Time Carbonizing Tissue for Pinholes |
销孔用一次性碳化纸的试验 |
| F510-93(2004) |
Standard
Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an
Abrader with a Grit Feed Method |
用带喂磨料的磨蚀测试机测定弹性地板覆盖物的耐磨性的试验方法 |
| F511-04 |
Standard
Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile |
弹性铺地砖切口(接缝密封性)质量的测试方法 |
| F512-06 |
Standard
Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings
for Underground Installation |
地下装置用平坦壁聚氯乙烯(PVC)导管及配件 |
| F513-00 |
Standard
Safety Specification for Eye and Face Protective Equipment for Hockey Players |
曲棍球运动员眼睛和面部防护设施的安全规范 |
| F519-05 |
Standard
Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating
Processes and Service Environments |
电镀处理和飞机保养用化学药品的机械氢脆化试验方法 |
| F520-97(2004) |
Standard
Test Method for Environmental Resistance of Aerospace Transparencies |
航空航天用透明物体的环境适应性试验方法 |
| F521-83(2004) |
Standard
Test Methods for Bond Integrity of Transparent Laminates |
透明层压材料粘结完整性的试验方法 |
| F526-97(2003) |
Standard
Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation
Effects Tests |
测定线性加速器脉冲发射效应试验用剂量的方法 |
| F528-99(2005) |
Standard
Test Method of Measurement of Common-Emitter D-C Current Gain of Junction
Transistors |
结式晶体管共射极直流增益的测量方法 |
| F537-01 |
Standard
Specification for Design, Fabrication, and Installation of Fences Constructed
of Wood and Related Materials |
木材及有关材料制栅栏结构的设计、制造及安装 |
| F538-03 |
Standard
Terminology Relating to the Characteristics and Performance of Tires |
与轮胎的特点及性能相关的术语 |
| F539-01 |
Standard
Practice for Fitting Athletic Footwear |
使运动鞋合适的调整 |
| F541-04 |
Standard
Specification for Alloy Steel Eyebolts |
合金钢有眼螺栓试验方法 |
| F542-02 |
Standard
Test Method for Exothermic Temperature of Encapsulating Compounds for
Electronic and Microelectronic Encapsulation |
电子元件及微电子元件封装用密封化合物发热温度的试验方法 |
| F543-02 |
Standard
Specification and Test Methods for Metallic Medical Bone Screws |
皮质骨螺钉 |
| F547-06 |
Standard
Terminology of Nails for Use with Wood and Wood-Base Materials |
木材和木基材料用钉的术语 |
| F548-03ae1 |
Standard
Test Method for Intensity of Scratches on Aerospace Transparent Plastics |
航空航天透明塑料抗划痕强度试验方法 |
| F549-85(2004) |
Standard
Terminology Relating to Carbonless Copy Products |
有关无碳复制用产品名词的定义 |
| F551-89(2000) |
Standard
Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel
in Testing Tires |
测试轮胎用标准直径[67.23英寸(1.707m)]的实验室试验车轮 |
| F552-02 |
Standard
Terminology Relating to Chain Link Fencing |
与链环栅栏相关的术语的定义 |
| F555-01(2006) |
Standard
Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
立式真空吸尘器的电动机寿命评定试验方法 |
| F556-88(2006) |
Standard
Test Method for Curl of Carbonless Copy Papers |
无碳复写纸的卷曲试验方法 |
| F558-06 |
Standard
Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners |
真空吸尘器的空气性能特征的测试方法 |
| F559-05 |
Standard
Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel |
用试验专用轮测量道路试验路线长度的方法 |
| F560-05 |
Standard
Specification for Unalloyed Tantalum for Surgical Implant Applications(UNS
R05200, UNS R05400) |
外科植入设备用非合金钽(UNS
R05200, UNS R05400) |
| F561-05a |
Standard
Practice for Retrieval and Analysis of Medical Devices, and Associated
Tissues and Fluids |
金属矫形移植物的修复分析方法 |
| F562-02 |
Standard
Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for
Surgical Implant Applications (UNS R30035) |
外科植入用锻造钴镍铬钼合金(UNS
R30035) |
| F564-02(2006) |
Standard
Specification and Test Methods for Metallic Bone Staples |
骨科用U形钉 |
| F565-04 |
Standard
Practice for Care and Handling of Orthopedic Implants and Instruments |
矫形移植物与器具的维护与管理 |
| F567-00 |
Standard
Practice for Installation of Chain-Link Fence |
链环栅栏的安装 |
| F568M-04 |
Standard
Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners |
碳及合金钢米制外螺纹紧固件的技术规范 |
| F571-87(2001) |
Standard
Practice for Installation of Exit Devices in Security Areas |
安全区出口装置的安装 |
| F577-03e1 |
Standard
Test Method for Particle Size Measurement of Dry Toners |
干调色剂粒度测量的试验方法 |
| F584-06e1 |
Standard
Practice for Visual Inspection of Semiconductor Lead-Bonding Wire |
半导体引线连接线的外观检查 |
| F585-94(2000) |
Standard
Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers |
聚乙烯软管同现有污水管插接 |
| F588-04 |
Standard
Test Methods for Measuring the Forced Entry Resistance of Window Assemblies,
Excluding Glazing Impact |
窗组件(不包括窗玻璃)对强力进入耐力的试验方法 |
| F589-00 |
Standard
Consumer Safety Specification for Non-Powder Guns |
非粉末喷枪的安全使用规范 |
| F590-05 |
Consumer
Safety Specification for Non-Powder Gun Projectiles and Propellants |
非粉末喷枪的射弹及推进剂的安全使用规范 |
| F592-84(2006) |
Standard
Termninology of Collated and Cohered Fasteners and Their Application Tools |
有关检验和连接紧固件及其操作工具的术语 |
| F593-02e2 |
Standard
Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
不锈钢螺栓,六角头螺钉及螺柱 |
| F594-02 |
Standard
Specification for Stainless Steel Nuts |
不锈钢螺母 |
| F595-01(2005) |
Standard
Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic
Hose) |
真空吸尘器软管的耐用性及可靠性试验(全塑软管) |
| F596-82(2003) |
Standard
Practice for Comparative Evaluation of the Imaging Properties of Dry
Electrostatic Toners |
干静电调色剂的图象特性的比较评定 |
| F597-83(2003) |
Standard
Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved
Business Forms by Use of an Electric Typewriter |
用电动打字机对插入业务表格纸中的一次性复写纸的评定 |
| F598-00(2004) |
Standard
Practice for Determining the Resistance of Carbonless Papers to Capsular
Damage |
无碳纸耐卷筒损伤力的测定 |
| F601-03 |
Standard
Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
金属外科植入物的荧光渗透剂检测 |
| F602-98a(2003) |
Standard
Criteria for Implantable Thermoset Epoxy Plastics |
可热固环氧树脂塑料的植入标准 |
| F603-00 |
Standard
Specification for High-Purity Dense Aluminum Oxide for Surgical Implant
Application |
外科植入用高纯度密实氧化铝 |
| F605-88(2006) |
Standard
Practice for Determining Compatibility of One-Time Carbon Paper with
Carbonless Copy Papers When Interleaved into the Same Manifold Set |
当夹在同一多份打印材料中时测定一次性复写纸与无碳复印纸的兼容性 |
| F606M-05 |
Standard
Test Methods for Determining the Mechanical Properties of Externally and
Internally Threaded Fasteners, Washers, and Rivets [Metric] |
测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法 |
| F606-06 |
Standard
Test Methods for Determining the Mechanical Properties of Externally and
Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法(米制) |
| F607-03 |
Standard
Test Method for Adhesion of Gasket Materials to Metal Surfaces |
对衬垫材料金属表面粘附性试验方法 |
| F608-03 |
Standard
Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of
Household/Commercial Vacuum Cleaners |
家用真空吸尘器对地毯内藏污物去除效果的实验室试验方法 |
| F609-05 |
Standard
Test Method for Using a Horizontal Pull Slipmeter (HPS) |
用平拉滑动器对鞋底、鞋后跟或有关材料的静态抗滑性的测试方法 |
| F610/F610M-00a(2005) |
Standard
Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC)
Plastic Pipe Fittings by the Heat Reversion Technique |
热转换技术评定模压聚氯乙烯塑料管配件质量的测试方法 |
| F615M-95(2002) |
Standard
Practice for Determining Safe Current Pulse-Operating Regions for
Metallization on Semiconductor Components [Metric] |
在半导体元件上喷镀金属的安全电流脉冲操作区域的测定(米制) |
| F616M-96(2003) |
Standard
Test Method for Measuring MOSFET Drain Leakage Current (Metric) |
测量MOSFET(金属氧化物半导体场效应晶体管)排漏电流的标准测试方法(米制单位) |
| F619-03 |
Standard
Practice for Extraction of Medical Plastics |
医学塑料制品的萃取 |
| F620-06 |
Standard
Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical
Implants |
外科植入用钛6铝4钒特低杂质合金锻件 |
| F621-02 |
Standard
Specification for Stainless Steel Forgings for Surgical Implants |
外科植入用不锈钢锻件 |
| F622-79(2002) |
Standard
Specification for Preformed Cranioplasty Plates That Can Be Altered |
预制可替换的颅成形板 |
| F623-99e1 |
Standard
Performance Specification for Foley Catheter |
弗利医用导管的性能规范 |
| F624-98a(2003) |
Standard
Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for
Biomedical Applications |
生物学及医学用热塑性聚氨基甲酸乙酯固体及溶液的评定 |
| F625-94(2006) |
Standard
Practice for Classifying Water Bodies for Spill Control Systems |
与描述水质用溢流控制系统相关的环境条件 |
| F626-96a(2003) |
Standard
Specification for Fence Fittings |
栅栏连接件技术规范 |
| F627-99(2003) |
Standard
Practice for Testing Flake of Single-Strike Film Typewriter Ribbons |
一次性薄膜打字带的片状试验 |
| F628-06 |
Standard
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic
Drain, Waste, and Vent Pipe With a Cellular Core |
有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道规范.表40 |
| F629-02 |
Standard
Practice for Radiography of Cast Metallic Surgical Implants |
铸制金属外科植入物的照相惯例 |
| F631-99 |
Standard
Guide for Collecting Skimmer Performance Data in Controlled Environments |
受控环境中分离器性能数据的收集 |
| F639-98a(2003) |
Standard
Specification for Polyethylene Plastics for Medical Applications |
医疗设备用聚乙烯塑料 |
| F640-79(2000) |
Standard
Test Methods for Radiopacity of Plastics for Medical Use |
医用塑料辐射不透明度的试验方法 |
| F641-98a(2003) |
Standard
Specification for Implantable Epoxy Electronic Encapsulants |
可植入的环氧树脂电子胶囊密封材料 |
| F645-04 |
Standard
Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure
Piping Systems |
热塑塑料水压管系的选择、设计及安装 |
| F647-94(2000) |
Standard
Practice for Evaluating and Specifying Implantable Shunt Assemblies for
Neurosurgical Application |
神经外科用可植入分路组件的评定和确定 |
| F648-04 |
Standard
Specification for Ultra-High-Molecular-Weight Polyethylene Powder and
Fabricated Form for Surgical Implants |
外科植入用超高分子量聚乙烯粉末及成形件技术规范 |
| F649-01 |
Standard
Practice for Secondary Calibration of Airborne Particle Counter Using
Comparison Procedures |
用比较程序进行空中游离微粒计数器的二次校正 |
| F654-03 |
Standard
Specification for Residential Chain Link Fence Gates |
住宅用链环栏栅门 |
| F655-06 |
Standard
Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
真空吸尘器试验用试验地毯和缓冲垫 |
| F656-02 |
Standard
Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl
Chloride) (PVC) Plastic Pipe and Fittings |
聚氯乙烯塑料管和配件的溶剂胶结接口用打底剂 |
| F658-00a(2006) |
Standard
Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical
System Based Upon Light Extinction |
用近似单分散球形颗粒材料进行液体游离粒子计数器的限定尺寸校准、分辨率和计算准确度 |
| F659-06 |
Standard
Specification for Skier Goggles and Faceshields |
抗高冲击眼睛防护装置 |
| F660-83(2002)e1 |
Standard
Practice for Comparing Particle Size in the Use of Alternative Types of
Particle Counters |
替换型粒子计数器使用过程中粒度比较 |
| F665-98(2003) |
Standard
Classification for Vinyl Chloride Plastics Used in Biomedical Application |
生物医学用氯乙烯塑料分类 |
| F667-06 |
Standard
Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings |
大直径波纹聚乙烯管及配件 |
| F668-06 |
Standard
Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated
Steel Chain-Link Fence Fabric |
聚氯乙烯涂层钢链环栏栅织物 |
| F670-02 |
Standard
Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing |
5和10加仑(20和40升)的润滑油配料容器 |
| F676-97(2003) |
Standard
Test Method for Measuring Unsaturated TTL Sink Current |
测量不饱和的晶体管逻辑电路吸收电流的方法 |
| F677-04 |
Standard
Test Method for Fluid and Grease Resistance of Thermoset Encapsulating
Compounds Used in Electronic and Microelectronic Applications |
电子和微电子学应用的热固密封胶的耐流体和滑脂性能标准试验方法 |
| F679-06 |
Standard
Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity
Sewer Pipe and Fittings |
大口径聚氯乙烯塑料污水管及配件 |
| F680-80(2002) |
Standard
Test Methods for Nails |
钉子的试验方法 |
| F681-82(2004) |
Standard
Practice for Use of Branch Connections |
支路连接的应用 |
| F682-82a(2004) |
Standard
Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
锻制碳素钢套管接头 |
| F683-03a |
Standard
Practice for Selection and Application of Thermal Insulation for Piping and
Machinery |
管道系统和机械设备绝热的选择和应用 |
| F685-96(2006) |
Standard
Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing
Copiers Using Single-Component Toner Systems |
测定在使用单一成分调色剂系统的非加热固定复印机中调色剂的使用率、效率及撒粉度 |
| F686-94(2006) |
Standard
Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper
with an Electric or Electronic Typewriter |
用电动打字机打字时无碳复写纸产生的印迹质量的评定 |
| F688-05 |
Standard
Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy
Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
外科移植用锻制钴镍铬钼合金中厚板,薄板及箔 |
| F689-97(2004) |
Standard
Practice for Determination of the Temperature of Above-Ground Plastic Gas
Pressure Pipe Within Metallic Casings |
有金属套管的地上塑料气体压力管的温度测定 |
| F690-86(2003)e2 |
Standard
Practice for Underground Installation of Thermoplastic Pressure Piping
Irrigation Systems |
热塑压力管道灌溉系统的地下装置 |
| F692-97(2002) |
Standard
Test Method for Measuring Adhesion Strength of Solderable Films to Substrates |
测量可焊膜与基片的粘结强度的方法 |
| F693-01 |
Standard
Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of
Liquid Seam Sealers |
使用液体封缝剂时弹性铺地薄板的密封接缝 |