| G1-03 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens | 腐蚀试样的制备,清洗和评定 |
| G2/G2M-06 | Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C] | 在750°F蒸汽中或在680°F水中锆,铪及其合金产品腐蚀检验法 |
| G3-89(2004) | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing | 腐蚀检验中用的电化测量的常规方法 |
| G4-01 | Standard Guide for Conducting Corrosion Tests in Field Applications | 在工厂设备中进行腐蚀试验指南 |
| G5-94(2004) | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements | 作静电位标记和动电位阳极极化测量的基准测试方法 |
| G6-88(1998) | Standard Test Method for Abrasion Resistance of Pipeline Coatings | 管道涂层耐磨性的试验方法 |
| G7-05 | Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials | 非金属材料的大气环境曝光检测 |
| G8-96(2003) | Standard Test Methods for Cathodic Disbonding of Pipeline Coatings | 管道涂层阴极剥离的试验方法 |
| G9-87(1998) | Standard Test Method for Water Penetration into Pipeline Coatings | 管道涂层渗水性的试验方法 |
| G10-83(2002) | Standard Test Method for Specific Bendability of Pipeline Coatings | 管道涂层比可弯性的试验方法 |
| G11-04 | Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings | 管道涂层受室外气候影响的试验方法 |
| G12-83(1998) | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel | 钢制管道涂层厚度无损测量的试验方法 |
| G14-04 | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) | 钢制管道涂层抗冲击性的试验方法(落锤试验) |
| G15-06 | Standard Terminology Relating to Corrosion and Corrosion Testing | 与腐蚀及腐蚀测试有关的标准术语 |
| G16-95(2004) | Standard Guide for Applying Statistics to Analysis of Corrosion Data | 用统计作腐蚀数据分析 |
| G17-88(1998) | Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) | 管道涂层抗穿透性的试验方法(钝头杆) |
| G18-88(1998) | Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines | 镀层管道连接件,配件及搭接板的试验方法 |
| G19-04 | Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial | 用直接土埋法对管道涂层抗剥落特性的试验方法 |
| G20-88(2002) | Standard Test Method for Chemical Resistance of Pipeline Coatings | 管道涂层抗化学药物腐蚀性的试验方法 |
| G21-96(2002) | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | 合成聚合材料防霉性的测定 |
| G24-05 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass | 自然光透过玻璃进行曝光 |
| G28-02 | Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys | 煅制高镍铬轴承合金晶间腐蚀敏感性的检查用测试方法 |
| G29-96(2002) | Standard Practice for Determining Algal Resistance of Plastic Films | 塑料膜抗藻类腐蚀性的测定 |
| G30-97(2003) | Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens | 制作和使用U形弯曲应力腐蚀试样 |
| G31-72(2004) | Standard Practice for Laboratory Immersion Corrosion Testing of Metals | 金属的实验室浸渍腐蚀试验 |
| G32-03 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus | 使用振动装置对气蚀侵蚀的试验方法 |
| G33-99(2004) | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens | 金属镀层钢样品对大气腐蚀检测数据的记录 |
| G34-01e1 | Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) | 2XXX和7XXX系列铝合金剥落腐蚀敏感性的试验方法(EXCO 试验) |
| G35-98(2004) | Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids | 不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性的测定 |
| G36-94(2000) | Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution | 评定在沸腾的氯化镁溶液中金属及其合金的抗应力腐蚀断裂 |
| G37-98(2004) | Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys | 用pH值为7.2的玛特松(mattsson's)溶液评定铜锌合金的应力腐蚀断裂灵敏性 |
| G38-01 | Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens | C-环形应力腐蚀试样的制作和使用 |
| G39-99(2005) | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 曲梁应力腐蚀试样的制备和使用 |
| G40-05 | Standard Termninology Relating to Wear and Erosion | 磨损和腐蚀的相关术语 |
| G41-90(2000) | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment | 测定金属在热盐环境下应力断裂敏感性 |
| G42-96(2003) | Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures | 在高温条件下管道覆层阴极剥离合作用的试验方法 |
| G44-99(2005) | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution | 在3.5%氯化钠溶液中用交替浸渍法评定金属及合金的抗应力腐蚀破裂 |
| G46-94(2005) | Standard Guide for Examination and Evaluation of Pitting Corrosion | 斑蚀检验和评定 |
| G47-98(2004) | Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products | 测定高强度铝合金制品应力腐蚀断裂敏感性的试验方法 |
| G48-03 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution | 用氯化铁溶液测定不锈钢及有关合金耐斑点腐蚀及裂隙腐蚀的试验方法 |
| G49-85(2005) | Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens | 直接拉伸应力腐蚀试样的制备和使用 |
| G50-76(2003) | Standard Practice for Conducting Atmospheric Corrosion Tests on Metals | 大气对金属腐蚀试验的实施 |
| G51-95(2005) | Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing | 测量腐蚀试验用土壤pH值的测试方法 |
| G52-00(2006) | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater | 在海水表面的金属及其合金的暴露及评定 |
| G55-88(1998) | Standard Test Method for Evaluating Pipeline Coating Patch Materials | 评定管道涂覆搭接材料的试验方法 |
| G56-82(2005) | Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons | 墨水浸渍的织物打印带磨损性试验方法 |
| G57-95a(2001) | Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method | 用温纳四电极法现场测量泥土电阻率 |
| G58-85(2005) | Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments | 焊件的应力腐蚀试样的制备 |
| G59-97(2003) | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements | 动电势极化电阻测量 |
| G60-01 | Standard Practice for Conducting Cyclic Humidity Exposures | 进行循环湿度试验的测试方法 |
| G61-86(2003)e1 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys | 铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法 |
| G62-87(1998)e1 | Standard Test Methods for Holiday Detection in Pipeline Coatings | 假期检测管道覆层的测试方法 |
| G63-99 | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 供氧设备用非金属材料的评定 |
| G64-99(2005) | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys | 热处理铝合金抗应力腐蚀断裂性的分类 |
| G65-04 | Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus | 用干砂/橡胶轮装置测定磨蚀的测试方法 |
| G66-99(2005)e1 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) | 5XXX系列铝合金的剥落腐蚀敏感性的目视评定的测试方法(ASSET试验) |
| G67-04 | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) | 用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏干性的试验方法(NAMLT 试验) |
| G69-97(2003) | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys | 测定铝合金潜在腐蚀性 |
| G70-81(1998) | Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) | 管道涂层环形可弯曲性的试验方法(压实试验) |
| G71-81(2003) | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes | 电解液中电流腐蚀测试的实施和评定 |
| G72-01 | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment | 在高压富氧环境中液体和固体自燃点的测试方法 |
| G73-04 | Standard Practice for Liquid Impingement Erosion Testing | 液体动力附着侵蚀试验 |
| G74-01 | Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact | 材料对气流冲击着火敏感度的测试方法 |
| G75-01 | Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) | 测定材料的泥浆磨蚀性(磨碎数值)和泥浆磨蚀特性曲线(SAR数值)的测试方法 |
| G76-05 | Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets | 使用气体喷雾器进行固体微粒水锤(点)腐蚀试验 |
| G77-05e1 | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test | 用块环磨损试验为材料抗滑动磨损分级的试验方法 |
| G78-01 | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments | 海水及其它含氯化物的水文环境中铁基和镍基不锈合金的裂隙腐蚀试验 |
| G80-88(1998) | Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings | 管道覆层比阴极剥落性的试验方法 |
| G81-97a(2002)e1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test | 颚式破碎机刨削磨损试验 |
| G82-98(2003) | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance | 预测电流腐蚀特性用电流系列的制定和使用 |
| G84-89(2005) | Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing | 在大气腐蚀测试中表面暴露在潮湿条件下湿润时间的测量 |
| G85-02e1 | Standard Practice for Modified Salt Spray (Fog) Testing | 改进的盐喷雾(雾化)试验 |
| G86-98a(2005) | Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments | 在加压氧化环境中测定材料对机械冲击着火敏感性的试验方法 |
| G87-02 | Standard Practice for Conducting Moist SO2 Tests | 潮湿二氧化硫(SO2)的试验 |
| G88-05 | Standard Guide for Designing Systems for Oxygen Service | 供氧设备的设计体系 |
| G90-05 | Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight | 用集中自然阳光光线法加速实施对非金属材料的室外风蚀 |
| G91-97(2004) | Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique | 使用硫酸化极板技术检测大气中的二氧化硫 |
| G92-86(2003) | Standard Practice for Characterization of Atmospheric Test Sites | 大气试验现场的表征 |
| G93-03e1 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments | 富氧环境用材料和设备的清洁处理方法 |
| G94-05 | Standard Guide for Evaluating Metals for Oxygen Service | 供氧用金属的评定 |
| G95-87(1998)e1 | Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) | 管道覆层阴极剥离检测的测试方法(化学腐蚀电解槽法) |
| G96-90(2001)e1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) | 工厂设备中腐蚀性的在监视 |
| G97-97(2002)e1 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications | 地下设备用镁电镀阳极试样实验室评定的试验方法 |
| G98-02 | Standard Test Method for Galling Resistance of Materials | 材料抗磨损试验方法 |
| G99-05 | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus | 用针盘仪进行磨损试验的测试方法 |
| G100-89(2004) | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization | 循环电流梯级极化的测试方法 |
| G101-04 | Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels | 低合金钢耐大气腐蚀估价 |
| G102-89(2004)e1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements | 和相关的电化测量信息腐蚀率的计算 |
| G103-97(2005) | Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution | 在6%沸腾的氯化钠溶液中进行铝锌镁低铜合金的应力腐蚀断裂检测的方法 |
| G105-02 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests | 湿砂/橡胶轮磨蚀试验方法 |
| G106-89(2004) | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements | 电化学阻抗测量用算法和设备的验证 |
| G107-95(2002) | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input | 计算机化数据库输入用金属腐蚀数据的采集和编辑格式 |
| G108-94(2004)e1 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels | 检测AISI304和304L型不锈钢增感作用的电化学再活化性(EPR)的测试方法 |
| G109-99a(2005) | Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments | 混凝土暴露于氯化物环境时化学混合物对埋置在混凝土中的增强钢筋腐蚀作用的测试方法 |
| G110-92(2003)e1 | Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution | 将铝合金浸入氯化钠和过氧化氢溶液中进行热处理时抗晶粒间腐蚀的评定 |
| G111-97(2006) | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both | 高温或高压环境中或高温高压环境中的腐蚀试验 |
| G112-92(2003) | Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys | 进行铝合金的剥离腐蚀试验 |
| G113-05 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials | 与非金属材料自然和人工风蚀试验相关的术语 |
| G114-98 | Standard Practice for Aging Oxygen-Service Materials Prior to Ignitibility or Flammability Testing | 同氧气接触的材料易燃性测试前的老化 |
| G115-04 | Standard Guide for Measuring and Reporting Friction Coefficients | 摩擦系数的测量和报告 |
| G116-99(2004) | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion | 进行大气电流腐蚀用绕线螺栓试验 |
| G117-02 | Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests | 使用实验室间磨损和浸蚀试验数据的精密度的报告和计算措施 |
| G118-02 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases | 适用于数据库的滑动磨损试验数据的推建数据格式标准指南 |
| G119-04 | Standard Guide for Determining Synergism Between Wear and Corrosion | 测定磨损与腐蚀之间最佳协和作用的标准导则 |
| G120-01 | Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction | 索格利特萃取法测定材料和部件中可溶残余物污染的标准试验方法 |
| G121-98(2004) | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents | 评定清洗剂用有杂质试样制备的标准规程 |
| G122-96(2002) | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents | 评定清洗剂效果的标准试验方法 |
| G123-00(2005) | Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution | 沸腾酸化氯化钠溶液中不同镍合金含量不锈钢合金应力腐蚀裂纹评定的标准试验方法 |
| G124-95(2003) | Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres | 在富氧环境中金属材料燃烧特性的测定标准试验方法 |
| G125-00 | Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants | 测量气体氧化剂中液体和固体材料着火极限的标准试验方法 |
| G126-00 | Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres | 氧浓缩气氛中材料相容性和灵敏性标准术语 |
| G127-95(2000) | Standard Guide for the Selection of Cleaning Agents for Oxygen Systems | 氧气装置用清洗剂的选择标准导则 |
| G128-02e1 | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems | 控制氧浓缩系统危害的标准导则 |
| G129-00 | Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking | 评定金属材料对电磁促成裂纹的灵敏性的慢应变速率试验的标准规程 |
| G130-06 | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer | 使用光谱辐射计校准窄带和宽带紫外辐射计的标准试验方法 |
| G131-96(2002) | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques | 超声法清洗材料和元部件的标准规程 |
| G132-96(2001) | Standard Test Method for Pin Abrasion Testing | 销钉磨蚀试验用标准试验方法 |
| G133-05 | Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear | 平面上线性反弹球滑动磨损的标准试验方法 |
| G134-95(2001)e1 | Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet | 用气蚀喷液法测试固体材料腐蚀的标准试验方法 |
| G135-95(2001) | Standard Guide for Computerized Exchange of Corrosion Data for Metals | 金属腐蚀数据的计算机化交换用标准导则 |
| G136-03 | Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction | 用超声萃取法测定材料中可溶残留污染物的标准规程 |
| G137-97(2003) | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration | 用环形结构块料给塑料材料的抗滑动磨损特性分等的标准试验方法 |
| G138-06 | Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance | 用标准辐射源校准分光辐射谱仪的标准试验方法 |
| G139-05 | Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method | 用载荷断裂法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准方法 |
| G140-02 | Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method | 用湿蜡法测定大气氯化物沉淀速率的标准试验方法 |
| G141-03 | Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials | 非金属材料曝光测试中寻址易变性的标准导则 |
| G142-98(2004) | Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both | 测定金属在氢气中(包括高压、高温或高压高温条件下)脆性敏感度的标准试验方法 |
| G143-03(2004) | Standard Test Method for Measurement of Web/Roller Friction Characteristics | 测量卷材/滚子摩擦特性的标准试验方法 |
| G144-01 | Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer | 用全碳分析法高温氧化分析仪测定材料和元件中残余杂质的标准试验方法 |
| G145-96(2001) | Standard Guide for Studying Fire Incidents in Oxygen Systems | 研究氧气系统中火灾的指南 |
| G146-01 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service | 高压、高温精炼氢设备中使用的不锈合金/钢双层板材非连接性评定标准导则 |
| G147-02 | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests | 自然与人工老化试验用非金属材料的修整和维护标准规程 |
| G148-97(2003) | Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique | 用电化学技术评价金属中氢吸取、渗透和转移惯例 |
| G150-99(2004) | Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels | 不锈钢电化学临界点蚀温度测试的标准试验方法 |
| G151-00 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | 在使用实验室光源的加速试验装置中使非金属材料曝光的标准导则 |
| G152-06 | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials | 用开放式碳弧火花光谱仪器对非金属材料进行曝光的操作标准惯例 |
| G153-04 | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials | 用封闭式碳弧火花光谱仪器对非金属材料进行曝光的操作标准惯例 |
| G154-06 | Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials | 非金属材料紫外线曝光用荧光设备使用标准惯例 |
| G155-05a | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 非金属材料曝光用氙弧光设备使用标准惯例 |
| G156-02 | Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test | 监控曝光试验条件一致性所使用的风化基准样件选择和特性标准惯例 |
| G157-98(2005) | Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries | 化工行业用熟铁及耐腐蚀镍基合金防腐特性鉴定标准导则 |
| G158-98(2004) | Standard Guide for Three Methods of Assessing Buried Steel Tanks | 评定埋装在地下的钢储箱三种方法的标准导则 |
| G160-03 | Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial | 用实验室土壤埋藏法评估微生物对非金属材料灵敏度的标准惯例 |
| G161-00 | Standard Guide for Corrosion-Related Failure Analysis | 与腐蚀相关的失效分析指南 |
| G162-99(2004) | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils | 实施和评估实验室土壤腐蚀试验的标准惯例 |
| G163-99(2004) | Standard Guide for Digital Data Acquisition in Wear and Friction Measurements | 在耐磨性和摩擦力测试中获取数字化数据的指南 |
| G164-99(2004) | Standard Test Method for Determination of Surface Lubrication on Flexible Webs | 柔性薄膜表面润滑剂检测试验方法 |
| G165-99(2005) | Standard Practice for Determining Rail-to-Earth Resistance | 检测铁轨对地面的阻力惯例 |
| G166-00(2005) | Standard Guide for Statistical Analysis of Service Life Data | 使用寿命数据统计分析指南 |
| G167-05 | Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer | 用直接日射强度表校正日射强度计试验方法 |
| G168-00 | Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens | 双梁应力腐蚀样品的制备和使用惯例 |
| G169-01 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests | 环境试验基本统计方法应用指南 |
| G170-01a | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory | 实验室评价与鉴定油田和炼厂用腐蚀抑制剂指南 |
| G171-03 | Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus | 用金刚石触针测定材料划伤硬度的试验方法 |
| G172-03 | Standard Guide for Statistical Analysis of Accelerated Service Life Data | 加速运行的寿命数据的统计分析指南 |
| G173-03e1 | Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface | 顺行正常和在37°倾斜面半球的日光分光照度标准表 |
| G174-04 | Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact | 通过与耐磨圈接触测量材料抗磨损性的试验方法 |
| G175-03 | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications | 用于医疗和急救应用的氧气调节器的起火敏感性和出错容许量的评估测试方法 |
| G176-03 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method | 用环形结构块磨损测试－累积磨损法对塑料抗滑动磨损性分等的试验方法 |
| G177-03e1 | Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface | 在37度倾斜面半球日光紫外线光谱分布状态标准表 |
| G178-03 | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique | 用锐截止-打开滤波器或光谱方法测定材料激活光谱( 对辐照源的波长敏感性)的标准规程 |
| G179-04 | Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests | 自然老化测试用的金属黑板和白板温度设备规范 |
| G180-04 | Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete | 抑制混凝土中钢腐蚀的混合物的初始筛选的试验方法 |
| G181-04 | Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions | 润滑条件下活塞环和汽缸衬筒材料摩擦试验标准实施方法 |
| G182-06 | Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings | 滚动体轴承的分离摩擦特性的测定标准试验方法 |
| G183-05 | Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers | 野外使用日射强度计，日温计和UV放射计标准规程 |
| G184-06 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage | 使用旋转罩评估和考核油田和炼油厂腐蚀抑制剂标准规程 |
| G185-06 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode | 使用旋转汽缸电极评估和考核油田和炼油厂抑制剂标准规程 |
| G186-05 | Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys | 检测气体泄露探测仪溶液是否引起黄铜合金压力腐蚀断裂的标准试验方法 |
| G187-05 | Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method | 使用双电极土槽方法检测土壤电阻系数的标准试验方法 |
| G188-05 | Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys | 用于铜和其他铜合金的检漏仪标准规范 |